Cold Fusion Viper Wet Kits

Kit Contains: 1 x 10lb Nitrous Oxide Bottle

1 x Pair of steel powder coated Bottle brackets

1 x PRO Nitrous Oxide Solenoid capable of 400hp gains

1 x PRO Fuel Solenoid capable of 400hp gains

8 x jets for a wide range of HP settings

2 x 12 inch Blue stainless steel braided hose

2 x 12inch Red stainless steel braided hose

1 x 15 foot 6an stainless steel braided hose (for bottle to solenoid)

2 x Pro Fogger Nozzle

2 x nozzle hold fitting

1 x 6an Bottle Nut

1 x wide open throttle switch (used to activate the system when at full acceleration)

1 x 20 inch stainless steel braided hose (from Schrader valve to fuel solenoid)

1 x fuel line adapter fitting

1 x nitrous oxide pressure gauge to go on your bottle

2 x solenoid mounting brackets

2 x solenoid tees

1 x pack of screws for mounting

1 x solenoid fitting to attach your foggers

2 x blue solenoid fittings to attach your bottle to solenoid and your solenoid to fogger

1 x 12 volt 40 amp relay with plug in harness

1 x arming switch

15 ft of 12 gauge wire

You will also receive complete installation instructions via email